Conditioned angular grit G10–G120
Ten carbon-steel grades from 100% recycled wire. Nominal values at despatch, per ISO 11124 / SAE J444 / AMS 2431.
G10 — Heavy coarse
Shipbuilding, heavy metals, thick anti-corrosive coatings
- Nominal size
- 1.7–2.4 mm
- Class
- Heavy coarse
G12 — Heavy-duty bridging
Shipbuilding, structural steel, offshore platforms
- Nominal size
- 1.4–2.0 mm
- Class
- Heavy-duty bridging
G14 — General industrial
Structural fabricators, container / bridge / tank manufacturers
- Nominal size
- 1.2–1.7 mm
- Class
- General industrial
G16 — Medium-fine
Metal furniture, decorative metalwork, fine mechanical processing
- Nominal size
- 0.9–1.2 mm
- Class
- Medium-fine
G18 — Semi-aggressive structural
Steel construction, beams, reservoirs, infrastructure
- Nominal size
- 1.2–1.7 mm
- Class
- Semi-aggressive structural
G25 — Fine intermediate
Automotive, naval, railway, thin-wall components
- Nominal size
- 0.7–1.2 mm
- Class
- Fine intermediate
G40 — Fine preparation
Coatings under 80 µm, automotive components
- Nominal size
- 0.4–0.6 mm
- Class
- Fine preparation
G50 — Industrial finishing
Equipment reconditioning, gears, bearings, moulds
- Nominal size
- 0.3–0.5 mm
- Class
- Industrial finishing
G80 — Micro-blasting precision
Aerospace, electronics, medical devices
- Nominal size
- 0.18–0.25 mm
- Class
- Micro-blasting precision
G120 — Decorative / sensitive
Stainless steel, glass, turbines, aluminium
- Nominal size
- 0.10–0.18 mm
- Class
- Decorative / sensitive
Pre-production — no standing inventory. First commercial batches follow commissioning, Q3 2026.
If you need to…
The grade follows the operation, not the price. The mapping below comes from the product documentation.
| Operation | Recommended grades |
|---|---|
| Remove heavy rust / old paint on steel structures, beams, hulls | G10 / G12 / G14 |
| Prepare for thick anti-corrosive coating | G10 / G12 / G14 / G18 |
| Standard industrial coating prep | G14 / G16 |
| Clean welds without deformation (thin-wall) | G25 / G40 |
| Recondition automotive / axle components | G25 / G40 / G50 |
| Prep for thin coating (under 80 µm) | G40 / G50 |
| Rework moulds, dies, tooling | G50 / G80 |
| Finish medical / aerospace components | G80 / G120 |
| Decorative / visible finishing | G80 / G120 |
Table 1 — selection guide per product documentation. For applications between grades, send your target finish.
Granulometry & applications
| Grade | Nominal size | Class | Primary use |
|---|---|---|---|
| G10 | 1.7–2.4 mm | Heavy coarse | Shipbuilding, heavy metals, thick anti-corrosive coatings |
| G12 | 1.4–2.0 mm | Heavy-duty bridging | Shipbuilding, structural steel, offshore platforms |
| G14 | 1.2–1.7 mm | General industrial | Structural fabricators, container / bridge / tank manufacturers |
| G16 | 0.9–1.2 mm | Medium-fine | Metal furniture, decorative metalwork, fine mechanical processing |
| G18 | 1.2–1.7 mm | Semi-aggressive structural | Steel construction, beams, reservoirs, infrastructure |
| G25 | 0.7–1.2 mm | Fine intermediate | Automotive, naval, railway, thin-wall components |
| G40 | 0.4–0.6 mm | Fine preparation | Coatings under 80 µm, automotive components |
| G50 | 0.3–0.5 mm | Industrial finishing | Equipment reconditioning, gears, bearings, moulds |
| G80 | 0.18–0.25 mm | Micro-blasting precision | Aerospace, electronics, medical devices |
| G120 | 0.10–0.18 mm | Decorative / sensitive | Stainless steel, glass, turbines, aluminium |
Table 2 — nominal values at despatch. Carbon steel, 100% recycled wire; per ISO 11124 / SAE J444 / AMS 2431.
Not sure which grade fits?
Send the operation and target finish. We reply with the recommended grade and commercial terms.